Cone top chimney cap with connection to ceramics
The chimney cap aims to protect the internal part of the ceramic chimney from atmospheric precipitation, strengthen the chimney draft, enhance the aesthetics of the chimney, and deter potential intruders such as birds.
Made of 0.5 mm acid-resistant stainless steel of the highest quality, 1.4404 grade – ensuring high temperature resistance up to 650°C and long durability. It is mounted by press-fitting. Specially profiled “strips” effectively secure the cap from slipping out of the chimney.
Ø200
Models and technical specifications
When to install
Models and technical specifications
| code | name | A [mm] | B [mm] | C [mm] | D [mm] | E [mm] |
|---|---|---|---|---|---|---|
| 02-768 | Cone top chimney cap Ø200 with connection to ceramics acid-resistant | 195 | 145 | 345 | 380 | 290 |
*tolerance of up to 5%
When to install
The chimney cap should be installed:
- in case of weak or lack of draft during burning in the heating device
- when there is a backflow of fumes into the chimney during burning
- when the chimney is too short and has a small cross-section, causing disturbances in the flow of exhaust gases
- in areas prone to strong winds
- when the house is surrounded by tall trees, tall buildings, or is located in a valley
- when the chimney cap is located below the ridge of the roof
