Domestic fan aRid

aRid is an axial celling fan. Its design was inspired by an air turbine. Long engine life is guaranteed thanks to the highest quality ball-bearing.

Ø 100   Ø 120   Ø 150  
 
ceiling mounting

Available models:

BB S
connected via an electrical cube to the basic model and can be activated using its own switch, for example, together with the lighting
BB TS

The fan turns on when power is applied (e.g., on a switch shared with the light) and will work until the power is turned off plus for the time set on the controller. This works well, for example, after a bath, where moisture is still blown out after the user leaves the bathroom.

The fan requires a three-wire cable, as it is necessary to connect the control cable.

BB HS+TS

Has a humidity sensor, which the user sets in the range of 40 – 80%. The fan turns on when the set threshold is exceeded by bounds (e.g., when taking a bath) and runs until the humidity level is lowered plus about 3 minutes – to maintain the effect.

The fan requires a three-wire cable, as it is necessary to connect the control cable.

See also:
Scroll to Top