Domestic fan pRestige

 

Fans from pRestige family are axial wall fans with innovative design inspired by cubistic, universal shape of a square. Those fans were designed for economics and ecology purpose. They are equipped with a gravity shutter, which blocks the reverse airflow without additional energy consumption. pRestige fans are the best choice for rooms with high humidity level.

Ø 100      Ø 120       Ø 150 
 

Available models:

ZGS

connected via an electrical cube to the basic model and can be activated using its own switch, for example, together with the lighting

ZGPS

connected  via a plug and is switched by decorative chain

ZGTS

The fan turns on when power is applied (e.g., on a switch shared with the light) and will work until the power is turned off plus for the time set on the controller. This works well, for example, after a bath, where moisture is still blown out after the user leaves the bathroom.

The fan requires a three-wire cable, as it is necessary to connect the control cable.

ZGHS+TS

Has a humidity sensor, which the user sets in the range of 40 – 80%. The fan turns on when the set threshold is exceeded by bounds (e.g., when taking a bath) and runs until the humidity level is lowered plus about 3 minutes – to maintain the effect.

The fan requires a three-wire cable, as it is necessary to connect the control cable.

ZGMS

has a motion sensor that activates the fan when it senses the user’s presence and runs for a specified time.

The fan requires a two-wire cable.

See also:
Scroll to Top